<dl id="hblz6"></dl>

  1. <menuitem id="hblz6"></menuitem>

      1. Welcome to Dongguan Tai Fu Machinery Co., Ltd. official website

        Dongguan Tai Fu Machinery Co., Ltd.

        Dongguan Tai Fu Machinery Co., Ltd.

        Focus on the production and manufacture of injection molding machine for 10 years, national high-tech enterprise

        South China:136-8666-5453

        East China:139-2550-8791

        Contact
        TEL:13686665453

        Contacts:Manager Zeng
        phone:13925508791
        Email:2994331754@qq.com
        address:Fulong Yangwu Industrial Zone,Shipai Town,Dongguan City,Guangdong Provice,China

        history record

        Noise analysis of horizontal injection molding machine

        source:   time:2018-04-14   Click:830

        Abnormal noise produced by horizontal injection molding machine indicates that parts are damaged or not adjusted properly. We should identify the cause of noise and make immediate maintenance.

        1, the hydraulic oil in the tank is insufficient, the oil pump inhalation air or the blockage of the oil filter will cause the oil pump to be short of oil, causing the bubbles in the oil to discharge the impact blade to produce noise. The solution is to check the amount of oil, prevent the air from inhaling and clean the filter.

        2, hydraulic oil viscosity is high, increase flow resistance, need to replace the right hydraulic oil.

        3, due to the damage of the bearings or blades of the oil pump or motor, the concentricity deviation of the coupling causes noise, so we must adjust the concentricity or replace the parts.

        4, the direction valve response failure, but the function is still in, such as the valve heart wear, leakage, burr blocking, movement is not flexible, the electromagnetic valve failure due to insufficient current will also produce noise. The way to solve the problem is to clean the spool, wear the valve core to replace the new parts, and the current must be stable and sufficient.

        5, the damage of hydraulic components or the blockage of oil pipelines cause noise when hydraulic oil flows at high speed.

        6, mechanical part failure, bearing wear or mechanical lack of lubricating oil or parts loosening, we should find out the reason to fasten or replace parts.

        Popular tags:
        CONTACT THE TAIFU

        Contact: Manager Zeng

        Mobile phone:13925508791

        Fax:0769-81929375

        email:2994331754@qq.com

        Address: Fulong Yangwu Industrial Zone,Shipai Town,Dongguan City,Guangdong Provice,China

        Copyrights©2018 Dongguan Tai Fu Machinery Co., Ltd. All Rights Reserved case number:粵ICP備16078114號

          <dl id="hblz6"></dl>

        1. <menuitem id="hblz6"></menuitem>

            1. 国产亚洲精品线视频在线,校园专区另类小说,毛片,免费基地欧美毛片,欧美 日产 国产Ac,高清无码中文字幕无线